< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=177525256911397&ev=PageView&noscript=1" />

JB95 (re)start only after power cycling

YAGE

New Member
Hi,

our JB95 starts only after power cycling (disconnecting the power adapter).
This happens when restarting in windows or even if I do a shut down and then start the JB95 via the on button.
The blue light shows up and also the fan is running but no output to the monitor (neither HDMI nor DP) and also USB is not powered (mouse stays dark).

I tried to fix this by installing the bios update, but it still happens in 95%.

Any ideas how to fix that?

Br
 

joey

Administrator
Staff member
Please unplug all external devices and use a paperclip to press and hold the reset hole for 30 seconds to clear CMOS.
 

YAGE

New Member
Hi,

did so several time.
Now the shutdown works, but only if I wait several seconds before pushing the on button again.
Restart from Windows still causes the problem. Also pushing the power button as soon as the light goes off.

BTW: Also installed latest BIOS, nothing changed.

Br
 
Top Bottom