< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=177525256911397&ev=PageView&noscript=1" />

GN41 eMMC Problem,... no Win10 Installation possible

mslogo

New Member
Hi!
I have a Problem with the eMMC.

I think the eMMC is broken.
On boot with linux (on USB drive) there is this information:
root@kodlix:/# fdisk -l
Festplatte /dev/mmcblk0: 30,62 MiB, 32096256 Bytes, 62688 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes

How can i deactivate the eMMC permanent?
If i will install Win10 on an SATA-SSD the Installer will not work because it detects an part of an installation on the defect eMMC.

Please help me!

Thanks
Mike
 

joey

Administrator
Staff member
If it is within the warranty period, please contact the seller of GN41 for replacement.
 

mslogo

New Member
Hm, ... over 2 years old ...
Is there another possibility?

Can I remove it mechanically?
Or is the controller still active ...
 

mslogo

New Member
I found a solution.
Yes Linux can be installed on a SATA SSD.
Unfortunately not Win10 because parts of the defect eMMC are recognized and the USB boot stick doesn't boot.
Solution: Mechanical removal of the eMMC from the circuit board.
Now the Win10pro installation / update will work!
 
Top Bottom