< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=177525256911397&ev=PageView&noscript=1" />

Boot without monitor

Black-Air

New Member
Hello,

Can you tell me if it possible to boot without monitor ?

We have a lot options in bios and I don’t find the good one (halt on error).

Thanks by advance for your answer.

Regards,
Yoann
 

Wen

KODLIX developer
Staff member
Please tell me BIOS version,Linux check: Enter the command "sudo dmidecode -t 0"
 

Black-Air

New Member
This cmd is not present on Daphile.
I find this information directly from bios : X5R 0.02 x64
Is this what you’re waiting for ?
 

Wen

KODLIX developer
Staff member
This cmd is not present on Daphile.
I find this information directly from bios : X5R 0.02 x64
Is this what you’re waiting for ?
Your bios version should be this: American Megatrends Inc. BLT-BI-MINIPC-X5R110-CC55B-BU-101-A, 13-Aug-19,
If the wrong BIOS file is provided, the motherboard will not boot after updating the BIOS.
BIOS file I sent to your private message 。
 

weado

New Member
Hello. I'm in the same situation, because I have since 1 year a Z83 II and I can't to start correctly without display on debian. I tried to install the drivers, but it's always the same thing.
This is my bios information with "sudo dmidecode -t 0" :
Code:
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0.0 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
        Vendor: American Megatrends Inc.
        Version: AZW-BI-MINIPC-X5R110-CC55B-BU-115-A
        Release Date: 03/21/2019
        Address: 0xF0000
        Runtime Size: 64 kB
        ROM Size: 4608 kB
        Characteristics:
                PCI is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                Boot from CD is supported
                Selectable boot is supported
                BIOS ROM is socketed
                EDD is supported
                5.25"/1.2 MB floppy services are supported (int 13h)
                3.5"/720 kB floppy services are supported (int 13h)
                3.5"/2.88 MB floppy services are supported (int 13h)
                Print screen service is supported (int 5h)
                Serial services are supported (int 14h)
                Printer services are supported (int 17h)
                ACPI is supported
                USB legacy is supported
                BIOS boot specification is supported
                Targeted content distribution is supported
                UEFI is supported
        BIOS Revision: 5.11
May you help me ?
 

weado

New Member
Hello, I don't if I can put my email here, but I can't to send you a message on this forum in private.

Thanks a lot and if you can send me the instructions.

EDIT : Thank you, I'll try it this weekend !
 
Last edited:

weado

New Member
Hello... So I followed word after word the instructions, but after the power off, clear CMOS and plug the power in my Z83, it doesn't want to start... The blue light turn on when I plug the power, but, I have nothing on my display.

Can I have to do something to regain my Z83 ?
 
Top Bottom