GN41 Windows 10 pro 1903 system

MinisForum

Administrator
Staff member
The SN code behind the GN41 series MINI PC starts with “MGW” .
The system file can be reinstalled by the system file provided below. The system file is Windows 10 pro 1903.

This is the download address:


Reinstall system steps:
 
Last edited by a moderator:

PIER

New Member
got a lot of problems in Win 10-1809 updates blocked forever without any MS valid solution. I downloaded and installed manually 2 days ago new Win10-1903 build and tested it. Horrible human interface a part, now everything seems to work fine and finally Windous Update works. Remember only to make clean your harddisk with the apposite cleanup programs in Win10 to free 20GB after installing V1903. bye
 

Wen

KODLIX developer
Staff member
Win 10-1903 is conducting internal testing, and Microsoft has optimized a lot of content. We will release it as soon as possible after the test is no problem.
 

jerryferguson

New Member
I've tried twice since July 1 to update my Z83-W to 1903. The installation fails and reverts my OS back to 1809. When do you all think I should be able to successfully accomplish this task?
 

Huang

Administrator
Staff member
I've tried twice since July 1 to update my Z83-W to 1903. The installation fails and reverts my OS back to 1809. When do you all think I should be able to successfully accomplish this task?
Can you tell me what is the error reported by your device update? If your device is Z83-W, it is possible that your storage space is insufficient.
 

jerryferguson

New Member
No error message appears, Windows just says an error occurred and restores the old OS. I don't have anything other than the OS on the system drive and it says there is 14.9 GB free.
 

Huang

Administrator
Staff member
No error message appears, Windows just says an error occurred and restores the old OS. I don't have anything other than the OS on the system drive and it says there is 14.9 GB free.
Do you have a USB flash drive or SD card when you upgrade?
 

MinisForum

Administrator
Staff member
You need to clear the hard drive data and choose to install it.
Enter the commands in sequence below the red image
**********************
diskpart
list disk
select disk 0 or 1 (Please choose 64G hard drive )
clean
********************
please reinstall again
131
 

Kim

New Member
I have a GN41 with the same error as above and windows can not fix it.
The Serial Number starts with a "GA"
How can I reload the Operation System?

Oh, and the DISKPART> clean run from the windows recovery USB does not remove the partitions. Claims it does but when I reboot to install they are still there.

1581614662313.png
Here is the Model
204

Please help!

I also cannot set the 2.5 inch SSD as the boot device!

Edit:

When I try to install from USB I get...

205

Then this...

206

Then this...

207

and the clean command will not remove the partitions.

Help
 
Last edited:

MinisForum

Administrator
Staff member
1. Cannot find the USB device, please replace or recreate the USB media boot, it is recommended to insert the USB3.0 port to re-install the system.
2. If you need to install the system to a 2.5-inch SSD,please modify "Scripts \ Mani.cmd" and change "SD" to "SATA"(Modify only mark red), then save and exit.
209
 

Kim

New Member
Thanks for the quick response.

I tried to install from the front USB3 port and received this error

211

I then changed the file as you suggested (like this)

210

And receive the same red screen.

Is there another setting I need to set?
Is this the correct OS installation file for my GN41?

Edit:

I tried again with the same error.

Also, Is this the correct BIOS?
And is the BIOS up to date?

212
213

Here is what the USB looks like:

215
 

Attachments

Last edited:

Kim

New Member
Thanks for the quick response:
I changed the label like this:
217

And now install stops at this:

218
*** Disk not MBR formatted ***

There are (4) four partitions on the built-in 64gb memory hard drive.
I can not delete these partitions with any software.
Diskpart claims to clean the Disk but the partitions just come back with all the files and volumes on it.

How can I delete the protected GPT partitions so a new operating system can be installed?

Is the 64 GB memory replaceable?

Note in the red where it tells us that "DiskPart succeeded in cleaning the disk" ......
If this was true, how can all the partitions and files still be on the drive?
Is the eMMC replaceable?
 
Last edited:

MinisForum

Administrator
Staff member
Because you are installing the system on a SATA hard disk, please clear the SATA hard disk data (you cannot save data after clearing)
**********************
diskpart
list disk
select disk 0 or 1(Please select a SATA hard drive)
clean
*** *****************
 

Kim

New Member
I am trying to install to the SD eMMC. The original location of the operating system. The red error above was from the attempted install to the "SD"

like this:

222

This causes an error.
Is the "SD" card defective?
Is the "SD" card replaceable?
 

MinisForum

Administrator
Staff member
"SD" is to install the system to eMMC 64G,
"SATA" is to install the system to a SATA HDD

eMMC 64G No defects, cannot be upgraded or replaced
 
Top Bottom