C-N34 LPDDR4 auto power-on

lsx1970

New Member
Hi,
I purchased the mini pc C-N34 LPDDR4.
In the bios I've configured "state after g3" = "S0 state" but in case of power failure when the power is restored the system does not restart and I have to push the on button.

Can you help me?
Thanks
 

lsx1970

New Member
I turned off the pc, I turned on the pc by holding down the F7 key but the menu is not displayed and windows is loaded.
if during boot I press the canc key it enters the bios configuration, I searched for the item enable F7 key for update bios but it is not present.
 

lsx1970

New Member
How is it possibile that F7 key does not start update bios menu?
Only canc key works fine during boot phase.
 

lsx1970

New Member
thank you,
the problem was my wired keyboard that during boot the F7 key did not work. I change it and I’ve updated succesfully.
 
  • Like
Reactions: Wen
Top Bottom